Rexim Fibre Glass - fibreglass filler putty

Fibreglass filler for polyester and fibreglass repairs

Rexim Fibre Glass filler is a fast-curing 2-part fibreglass filler for repairing fibreglass and polyester surfaces. Suitable for polyester boats, RIBs, jet skis and other fibreglass items. Thanks to its strong adhesion and high elasticity, this filler is suitable for filling cracks, holes and deep damage.

After curing, the surface can be finished with Glix Gelcoat Filler or Gelcoat Spray and then polished with Schutz.

Features

• Fast-drying 2-part fibreglass filler
• Strong adhesion to polyester and fibreglass
• High elasticity
• Suitable for deep damage, cracks and holes

Instructions for use

1. Sand the surface to be repaired with 40–60 grit and remove all dust.
2. Mix Rexim Fibre Glass with 2–3% hardener and stir thoroughly.
3. Apply the filler evenly using a filling knife or spatula.
4. Allow to cure for 10–20 minutes.
5. Sand the surface after curing.
6. Finish with Glix Gelcoat Filler or Gelcoat Spray and polish with Schutz.

Application

• Polyester boats
• RIB hulls
• Jet skis
• Fibreglass parts

Contents

• 200 g