Zodiac - Z2195 | diaphragm valve

This diaphragm is suitable for the surface-mounted (delrin) valve type Z2847, Z61928 and Z2107 and is used on various Zodiac, Bombard and Zodiac MilPro boats

The diaphragm is placed at the bottom of the valve and ensures a good seal of the valve. This makes it possible to pump air into the boat, but the air will not immediately flow out when you remove the adapter from the pump.

The membrane is made of thin rubber and has a diameter of 21mm. The length of the "stem" is 19mm and the diameter of the "stem" is 1.5mm.

Over time, this membrane can become dried out, causing the valve to no longer close 100%. Replacing this membrane may then be the solution.